Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is crucial to wash and oil upvc window repair windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is large, you might prefer security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

To fix a window repair that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, upvc window repair you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and do an initial fitting. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is an easy process, but it's easier to do when you have a person to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to give assistance.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could also become unbalanced. This is located on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace these.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance immediately.