What is a Ghost Immobiliser and Tracker?

An immobiliser is a device that prevents your car from starting without the correct fob or key. It also can help lower your car insurance rates.

The ghost system uses the buttons on your car's steering wheel or centre console, or door panels to create an individual pin code sequence that you can alter, think of it as the credit card PIN, but more secure (up to 20 button presses). It is undetectable and silently works through the CAN network.

Easy to install

A ghost immobiliser, also known as a PIN code blocker, is a device installed on your car's engine which stops it from starting in the event that the PIN code was not entered correctly. It is not only easy-to-install but also secure and therefore a good option for car owners in Bolton Rochdale.

The Ghost is a CAN bus immobiliser that is more secure than anything else available today. It protects your vehicle from key-cloning, hacking (relay attack) and even the theft of the keys inside your home. It blocks the engine of your car until you enter your unique PIN or the app is used to allow the engine to start.

Since it's part of the CAN data network of your vehicle there is no wiring that needs to be added, which means it can't be detected by sophisticated scanners or even deactivated by simple wire cutting. It's also inaccessible to professional thieves who use these methods since it doesn't emit signals that can be detected using diagnostic tools, and it does not emit a distinctive chirp when activated like many other systems available.

This device uses the original buttons in your vehicle (steering wheels doors, door panels or centre consoles) to generate an unique and changeable PIN sequence that only you know. The code is entered using your smartphone or a secret button located on the Ghost unit. It is not possible for anyone else to use this sequence except for you. This is why it is so effective to deter criminals, as they are unable to escape without notifying them of their presence.

If you decide to change your vehicle during the course of ownership, you can move the Ghost from one vehicle to another as long as it has a CAN bus that's compatible. It's a simple process that does not cause warranty voiding since it is part of the CAN data network and doesn't require any modifications to your steering wheel or status indicator. The best thing about the Ghost is that it's easy and less expensive to install than an a wheel lock, tracking system or tracker.

No key-fobs or LED indications to reveal the location of the vehicle.

We all consider our vehicle to be a pride and happiness in our lives, with this being the case, it is not surprising that some will spend a considerable amount of money on keeping their vehicle clean. It is essential to ensure the safety of our vehicles.

Unfortunately the criminals have become more bold and can hack into keyless entry systems, allowing them to gain access to your vehicle even whilst the keys are in the ignition or even inside your home. These criminals can then utilize a relay device in order to duplicate your car's unique signal and start the engine without you even knowing. These vehicles are often fitted with trackers, but they can be deactivated with a few simple tricks.

Autowatch has created a revolutionary solution to prevent this, dubbed Ghost. It is the first aftermarket CAN bus immobiliser on the market that safeguards your vehicle like no other. It's TASSA (Tracker and Aftermarket Security Systems Association) confirmed and insurance approved - meaning it can help you save money on your car insurance.

This innovative device was designed to be unnoticeable by thieves. It uses the buttons on your steering and dashboard to generate an unique 20-digit PIN code that must be entered to start the vehicle. It is a system that is not able to be detected by the use of RF scanning or code grabbing technology and can only be removed by a smartphone application installed via your key fob or the presence of two smartphones together.

It's also completely silent so that a burglar would not realize that it's inside your vehicle. Furthermore because it is connected to the CAN data network, there aren't any wires that need to be cut or removed, so it is not disconnected from the ECU to disable the system.

Other features include a valet function that allows your vehicle to be turned off temporarily to clean or service purposes as well as a PIN change function in the event that you forget your PIN, and maintenance and service modes to let you drive your car whenever you need it. The device can be placed at various locations within your car. Our certified ghost immobiliser and tracker installers will install it to ensure that there are no permanent marks left on the interior of your car.

No RF scanning technology or code-grabbing technology.

The Ghost Immobiliser doesn't use RF scanning technology or code-grabbing, which is the method by which thieves target cars to take keys and gain access to the computer in your car to make blank keys for your car. It makes use of the buttons on your dashboard and the steering wheel to communicate with your vehicle. It's therefore completely hidden and unnoticeable, as it's not visible. This also means that no extra wiring is required, since the Ghost will work with your vehicle's CAN data network This means that there aren't any circuit breaks during installation or operation, and is silent.

It blocks anyone from starting your car without a unique pin or smartphone authorisation and you will never have an empty vehicle. This means that even if your vehicle is stolen by key cloning, relay theft or ECU swapping, thieves will not be capable of starting your car, making them more likely to leave it alone for fear of getting found.

A secret password of buttons is created by combining the buttons you have on your dash board and steering wheel that only you know (as with a PIN number on a bank card). The system will then start the engine in the service valet mode when you press. This mode requires a different PIN code, or you can use the Autowatch App to unlock the car using your smartphone. The app can be used to lock or unlock your car. This lets you leave your car for valeting, or drive away without worrying that it will be stolen or the wrong keys are inside it.

The Ghost is a low-cost and discreet solution to protect your vehicle from contactless theft. It is TASSA-approved and may lower the cost of insurance. You can drive with peace knowing that you are safeguarding your most precious possessions. The Ghost is suitable for a range of different types of vehicles including vans and motorhomes So you'll be secure wherever you go. Call us today for your free quote and installation of the Autowatch Ghost.

No extra wiring

The ghost immobiliser is installed directly into the vehicle and is connected to the CAN data network. This is the reason it's so effective. The device doesn't require keys from the market and instead utilizes the buttons on your current car steering wheel and dashboard in order to create a unique PIN sequence that needs to be entered before the motor is able to begin. The sequence can be made as long or as short as you like and can contain numbers or letters. It's just as secure as a standard credit card. It is also possible to change it at anytime.

It is important to know that ghost isn't Thatcham-approved, unlike wheel locks or other after-market tracker devices. However, because of how the device works it is TASSA approved and recognised by a variety of insurance companies as a security measure that can lower your insurance premiums.

It is a great choice for those who want to keep their cars safe and secure while traveling abroad, or for valet parking and service firms. The device comes with a Valet mode that is activated. This allows the driver to start and drive the vehicle with set parameters such as 30mph speed limit, and without having to enter the pin code. The device can be turned off and fully activated upon returning to the car.

This feature is especially useful for those who make use of their vehicles, for example taxi drivers or valet services. This feature can be used by family members or friends to start your car even if it is in the garage or being washed. The Ghost can then be reactivated by entering the PIN code after you're back in possession of your vehicle.

Unlike many other after - market security products, the Ghost is fully sealed and small, which means it can be hidden in your vehicle. Its small size also means there is no trace of the device and it will not harm your vehicle in any way.