Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil upvc window repair windows and doors regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might think about a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform a test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and floors that are wet. The leaks of water from windows do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or UPVC Window Repair not present.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on the severity of the issue is, old caulking might need to be removed. It is important to remember that when it comes to upvc Window Repair window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with the breeze. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical part, hinges can be damaged over time. It is very easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to offer advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges may also become misaligned due to wear, which can cause gaps where the sash meets frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it could be necessary to have them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder. These are typically made of fabric which are filled with a kind of filler. They can be put on top of your windowsill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional immediately.