Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However, if windows with double glazed window repairs near me panes are held in place by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior UPVC Window Repairs to when you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may need to consider an alarm system that includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need open the window to access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue the caulking that was used up may require removal before a new layer of caulk can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process but it can be simpler if you have someone to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc window repair near me windows can be caused by different things. The hinges may also become misaligned due to wear, creating an opening where the sash and frame meet. If they are damaged beyond repair, it could be required to realign them. In addition, the interlock could be misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.