Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you may think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sagging. A sagging Upvc window Repair windows can cause issues with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the an appropriate fit. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

UPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and do a test fitting. The corners of the sash must be aligned with the casing joint. If it isn't, uPVC window repair you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to act if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer is applied. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is with the seal than the frame. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window, but it's easier if someone helps hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to give advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc window repairs near me windows can be caused by a few different things. Firstly the hinges, again because of wear and tear, can become misaligned, this causes gaps to develop between the sash and the frame. If they are beyond repair, it may be required to realign them. The interlock, which is located on the hinge of the window, may also become misaligned, again it's feasible to give them a clean but in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes filled with some type of filler. They can be put on the windowsill on top. They can help keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as you can.