Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor and could be trampled.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from getting into the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

upvc window repairs near me windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a number of problems that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows to reach the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles could also loosen. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close the window and then perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if wake up every morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the problem the old caulking may need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is easier if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to give advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and Window Repairs close more easily. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become unbalanced due to wear, creating gaps between the frame and sash. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a clean but in some instances it could be necessary to have these replaced.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time and let air escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you have any problems with your Upvc window you should consult an expert immediately.