Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good shape.

For pvc single pane windows it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation, you will need to source some plastic spacers that will aid the new pane in being able to fit properly into the window repair near me frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair timber windows the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap between the window and the door is significant, you may prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts and even security. It's crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to open the windows so you can reach the frame. With an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're happy with the fit, tighten the screws until they remain in place.

If you cannot reposition the hinges, you may need to replace the seal. Over time, pvc rubber seals lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is crucial to take action if awake each day to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer can be applied. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease it could be hinges at fault. They can be repaired by any skilled DIYer and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's very simple to change the hinges on a window, but it's easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become misaligned due to wear, which can cause gaps between the frame and sash. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time, and pvc allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them instead of fixing them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.