Double Glazed Window Repair

It's worth checking the warranty that comes with the majority of double-glazed windows. It usually covers issues with window hardware, such as hinges and locking mechanisms within the first ten years.

A leak in the seal is usually the reason for mist to form between your glass windows. This issue must be fixed immediately to avoid mold or damp growing within your home.

Condensation Between the Windows

If condensation appears between your windows, this could be an indication that the seal in the gas insulating the windows has failed. This can be a serious issue that needs to be dealt with as soon as you can particularly in winter, when humidity is at its highest. It could cause damage to the sills and sealant, and even mildew or mould.

Ideally, double-glazed windows should never have condensation between the panes. This issue can be caused by excessive humidity or a particularly cold snap. Fortunately, this is usually repairable without having to replace the entire window. A professional can drill small holes into the glass and spray the inside of the window with a special cleaning solution. The water is then taken out of the window, and an anti-fogger device may be installed to stop further accumulation of moisture in the future.

Condensation between windows can be caused by air leakage, or other factors outside the window. If this is the scenario, it's likely to take longer for moisture to collect in the window as the air has to be sufficiently warm for the water molecules to evaporate. In these situations it is recommended to replace the double glazed windows instead of trying to repair the existing sealed units.

A double-glazed glass window is composed of two or more pieces of insulated tempered glass, which are joined by a framework made of metal. The gap between the two windows is filled with an insulating gas like Krypton or argon and then sealed. The seal blocks the gases that are insulating from escape and also blocks air and moisture from entering the gap.

As windows age, seals get damaged and allow moisture to escape between the glass panes. It is crucial to recognize the signs of leaks in the seals because it indicates that the double glazing isn't performing as well as it did in the past. This could lead to lower energy efficiency, higher heating bills, damage to property and the possibility of condensation forming between the windows.

Mist

If you notice condensation on the outside of your windows, it is normal and indicates that your double glazing is functioning properly and retaining the heat inside your home. The condensation occurs because the air outside is warmer than the glass, and then reaches the dew point of the window prior to the air inside. This is among the many advantages of having high quality double glazing.

If the condensation is on the side of your window, it could be a sign of a ventilation problem in your home. The moisture that is accumulating can't go anywhere else and will end up on the carpets, windows furniture, and other areas of your home. The process of having this examined by an expert and ensuring that there is plenty of fresh air moving through the house will help to prevent it from happening in the future.

Another reason for mist on double-glazed windows is because the seal between two panes of glass is broken. This can be caused by wear and tear or by using chemical cleaning products. The best thing to do is fix the windows in the shortest time possible.

Professionally repairing upvc door your windows will ensure that they are fog-free free of condensation and free of misting. It's also cheaper than replacing the windows and units you will save money on your energy bill.

A FENSA registered window installer will provide you with a cost estimate for the repair or replacement of your double-glazed windows. If your existing windows are old and have been in use for a while you may want to consider upgrading them to A-rated energy efficient ones.

It is a good idea to keep copies of any warranties and agreements with your window fitters. This can be extremely helpful should any issues with the windows arise in the future, and you can then contact your installers to resolve the issues. This is a better option than ignoring the issue and causing additional problems in your home.

Close or open without difficulty

It's not just a nuisance when double-glazed windows are difficult to open or close. They could also result in more expensive energy bills due to heat loss and draughts. It can also pose a security risk, especially when the locks aren't functioning correctly. You should fix any double-glazed doors and windows as soon as you can.

If you are unable to open your windows and have tried the simplest solution such as using a screwdriver to prise it open, or tapping the frame using a sharp object, the issue may be more serious. The window may have moved and needs to be reset or there could be a gap between glass and frames. In either case, you should call in an experienced double glazing repair expert to make sure that the right repairs are made and to prevent any further problems.

It's not uncommon for cheap upvc doors window handles and lock mechanisms to get stuck or hard to operate particularly when they're worn out and worn. It is usually caused by a build-up of grease or dirt in the handle. This can be easily solved by cleaning it using a upvc door handle replacement cleanser. If this doesn't work, you could try gently tapping the upvc door hinges frame with a sharp object like an screwdriver, but be careful not to damage the handle or the window handle mechanism.

If this doesn't solve the issue, then the window might need to be replaced, as it is likely that the hinges aren't properly aligned, or the locking mechanisms are damaged. In this instance, you must seek out a professional repairing upvc door window repair expert.

David The Window Wizard specialises in all technical aspects of double-glazed repair of doors and windows, including fixing a jammed or shut double glazing window. He has a wealth of experience converting discontinued window mechanisms to modern ones. He will often reduce the expense of replacing the entire window. Call or email us today for more details or a no-cost quote.

Warping

Double glazed windows are often the best option for saving energy in your home. They are composed of two separate panes that have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm air inside. In time, however, these windows may become damaged or broken and require repair. Most repairs can be done without replacing the entire window.

Warping is a typical issue when double-glazed windows are installed. This happens when the windows begin to bend, twist or bow. This can impact the structural integrity and insulating capabilities of the window. Double glazed windows should be properly installed and maintained to avoid this issue.

Contact a specialist when you realize that your double-glazed windows are warping. This will help to prevent the situation from getting worse. They will be able to inspect your windows and identify the root cause of the warping. They will then utilize specific tools to correct the issue and make sure that your windows are sealed again.

The most common cause of this issue is the presence of water vapour between the windows, which can accumulate over time. This can be caused various factors like weather conditions, humidity and temperature variations. To remedy this, the specialist will drill a small hole through the window to let out the moisture. The specialist will use a cleaning agent on the glass to cleanse it, then apply a sealant.

If windows aren't able opened or closed, this may be a sign of a break in the mechanism or hinges. It is advisable to lubricate the areas of the window prior to calling a professional as this may resolve the issue and decrease the necessity for replacements. However, if your windows are old or are not providing the insulation you'd like to see it is usually better to replace them.