Why Should You Have a Ghost Immobiliser Installed?

Autowatch Ghost is the next-generation vehicle immobiliser. It protects your car from theft. It operates in a discrete manner by connecting to the vehicle's CAN network, and requires that a unique and changeable PIN sequence is entered to start the vehicle.

The system is quiet, does not have LED indicators and is unreadable with diagnostic tools. It is also TASSA recognized and approved by a few insurance companies.

No Key Fobs or LED Indicators

Ghost immobilisers are a revolutionary development in the field of car security that can stop thieves from driving your car, even if they manage to enter it. It connects silently to the CAN data circuit inside your vehicle, meaning there are no radio signals involved. This makes it difficult for thieves to get around it. It is also inaccessible with diagnostics and has no LED indicator to give away its whereabouts. This makes it an ideal option for cars that are expensive or rare, such as vintage cars.

autowatch ghost installers nottingham Ghost is a small device that can be concealed in your vehicle's loom which makes it virtually impossible for thieves to find it. The device connects to the CAN system, and connects to the ECU (Engine Control Unit) to deter theft. It is simple to install and can be completed in less than a half hour. It's also less intrusive than some other physical security devices, like steering wheel locks.

The device is built on the same technology used by GPS trackers, but it stops theft by preventing the vehicle from getting started. It makes use of buttons inside your vehicle to create a unique and reversible PIN code sequence that needs to be entered before you can drive your vehicle. The device can be programmed to utilize obscure buttons, such as those on the back of the rear demister to make it harder for thieves to guess the PIN. This type of technology is becoming increasingly popular and many insurance companies are now requiring it for vehicles with keyless entry systems.

The Ghost also blocks key cloning and hacking. The device is connected to the CAN bus system and utilizes the buttons in your vehicle to generate a unique, changeable code that must be entered before the car can begin. The device cannot be defeated by altering the ECU or adding new key fobs. The thief must employ a specific tool in order to bypass the immobiliser.

The cost of the ghost immobiliser is affordable, and it can be used in conjunction with a GPS tracker to ensure the safety of your vehicle. It's a great choice for older vehicles, and it can help you save money on insurance premiums. If you're thinking about a ghost immobiliser, contact us at Trackershop for a quote. We'll include installation in the cost, so you will be able to rest assured about your vehicle's security.

It is TASSA approved

Immobilisers are the best way to secure your car. It can disable features like the starter motor and fuel pump when the PIN code is not entered correctly. It is essential to install an immobiliser by an experienced professional. The installer should be TASSA certified, which ensures that the product is secure and functional. The process involves checking the credentials of the installer, which includes criminal background checks and identity verification.

The Ghost immobiliser is the newest solution to stop thieves from taking your vehicle. It connects directly to the CAN data network of your vehicle and does not require additional fobs or alarm systems. The system is completely silent and cannot be detected either by car trackers or thieves. It uses the existing buttons on your steering wheel, door panels, and the centre console to generate a unique PIN code sequence. The correct sequence needs to be entered to start your vehicle, which makes it extremely difficult for thieves to crack.

This innovative immobiliser has been approved by TASSA and can be installed at Trackershop. They are experts in the installation of this device. It also offers additional security products, including remote starters and a device to track theft. The team of technicians is able to install the device in your home or office.

It is important to protect your vehicle, as increasing numbers of vehicles are being stolen without the owners' keys. Modern keyless vehicles are especially vulnerable because it is simple to purchase cloning equipment and door lock pick sets on the internet. A autowatch ghost installation (www.borderpeaceschool.or.kr link for more info) Ghost can help to keep this from happening as it's not able to be spotted by thieves or picked up by the vehicle tracker.

The Ghost II CAN is completely protected and isn't able to be altered by thieves. It can detect attempts to tamper the ECU and will shut down certain components of the engine in order to disable it. In addition, it can even deactivate the alarm for cars to avoid being noticed and allowing thieves to escape in the vehicle.

It is reversible

The Ghost immobiliser can be installed or removed at any time. It is directly linked to your vehicle's Controller Area Network (CAN) and protects you by a PIN code that only you are aware of. Once the PIN code is entered correctly, the vehicle will not start, and thieves will be discouraged from trying to steal it.

The installation of the Ghost is not invasive and your vehicle's warranty will not be affected. The system is also compatible with any other aftermarket alarm or tracker that you might have installed. It will also not leave an imprint on your vehicle's interior or exterior. It's not noticeable to thieves because it does NOT use keys or LED indicators.

The Ghost Immobiliser is not one of the devices used by organized car thieves to identify circuit wiring on vehicles. It makes use of buttons on the dashboard or the steering wheel to create a unique PIN. This code must be entered to start the vehicle.

The Ghost Immobiliser can also safeguard your vehicle from OBD port hacking. This type of theft is becoming more common and is among the most difficult ways to prevent. The Ghost Immobiliser helps prevent these thefts since it stops the thief connecting a laptop to the OBD port of your vehicle and cloning keys.

The Ghost can be used in combination with a vehicle tracker. This can be extremely helpful in locating your car after it has been stolen. However, it isn't recommended that you use a tracker as your primary security measure to prevent theft since they don't stop the theft by itself. They are also easier to spot and remove than the Ghost immobiliser.

Easy to install

A Ghost immobiliser is a groundbreaking technology that will protect your car from theft. It works by connecting to your vehicle's CAN (Controller Area Network) system and generating an individual code sequence that is difficult for thieves to break. It is an inexpensive and highly effective method of protecting your car from being taken.

Ghost is designed to work with any vehicle and models, including those with aftermarket key fobs. It uses the buttons on your dashboard, steering wheel and central console to generate an individual PIN code sequence that prevents thieves from opening your car. It also has a variety of additional features, such as a GPS tracker that can locate your car.

Many drivers choose this type of device because it offers protection against a variety of vehicle theft. It is easy to install, quiet and doesn't use radio signals. It's also a good choice for those who do not want to buy a complete alarm system. However, it is essential to employ a professional to install the device to ensure it functions correctly.

If you're considering a Ghost immobiliser, make sure to have it installed by a professional to ensure it's functioning as it should. A professional will know where to put it and will ensure that the unit is properly connected to the electronic system in your vehicle. The installer will also ensure that the device is kept from view and can't be observed by anyone who doesn't have an underlying reason to know about it.

The autowatch ghost installation birmingham Ghost II CAN Immobiliser can be activated into Valet/Service mode, which permits your car to be driven at 30mph without having to use the access key. This makes it ideal to valet park or transport your car. It can even be used in this manner when your vehicle is being serviced by dealers. This mode can be disabled by the companion app and can be reset at the end of each use.

The Ghost is the first aftermarket CAN bus immobiliser that doesn't require any wire cutting. It is directly connected to your vehicle's onboard CAN network and is not identified by diagnostic tools or cloning devices. It is tamper proof silent, completely silent, and does not emit any radio signals. It's also reversible. which allows you to move it to another vehicle in the event of need.