Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from key cloning or hacking is a discrete device that can be put in place without causing any damage to your vehicle. It stops your vehicle from starting unless you enter the correct sequence of buttons within your vehicle like a password on the phone.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by blocking the engine from starting until it has the correct PIN code. This is done with no modification to the vehicle and is completely undetectable by thieves. The unit communicates directly with the ECU via the CAN databus in order to disable the vehicle. This system is similar to the one automobile manufacturers have been using in their cars for years, however, the thief can't add a new key or use key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with any vehicle that has an engine, including cars, vans, motorhomes and caravans as well as bikes. The same system can also be used on electric cars. It is an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is activated, it will block all buttons in your car and stop the ignition from starting without a PIN code having been entered before. This can be done using the Android or Apple mobile apps or by manually entering the code via your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great way to discourage thieves. If the vehicle cannot be started, they will move on.

The Ghost is small weatherproof device that is able to be hidden in the most difficult-to-access areas of your vehicle. It is extremely easy to install with an average of 20-30 minutes per vehicle. It is also very simple to remove should you decide to move your vehicle around or return it for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, and is recognized by certain insurance companies. It also features a secure emergency Pin Code Override, and a Service/Valet mode that can be activated by pressing a button on the app or using your key fob.

Disarm

Ghost immobilisers like mechanical devices to prevent theft that can be removed, are concealed in the car. They are nearly impossible to hack or bypass and even if discovered, thieves is unable to start the engine. A ghost immobiliser is capable of preventing key cloning, as well as signal jamming and devices spoofing. These are techniques thieves employ to gain entry into vehicles equipped that have standard immobilisers.

An immobiliser works by sending a code to the ECU (electronic control unit). If the wrong code is sent and the vehicle is not launched as the engine will not fire up. While it is possible to disable the ghost immobiliser with software, this would be very laborious and time-consuming. Only an authorised installer can install and use the software.

The Ghost immobiliser, a small device, is hidden in the vehicle's wiring loom. It is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, there are no LED indicators and it will not communicate with the engine via the OBD port. It communicates in a silent manner through the CAN data circuit.

The system will stop the vehicle from starting unless it receives a user defined PIN code sequence. This is entered through buttons on the steering wheel or door panels, or on the centre console. This is a more secure method to protect the car immobiliser ghost, since it doesn't require the use of a remote or key fob.

Ghost also has a service mode that can be turned on via the mobile application. This lets you give your keys to someone else to use for valet parking or service, without needing to enter the disarm sequence.

Whether your Ghost is in service mode or not you should not attempt to remove the system yourself as it can affect the engine and cause damage. It is recommended that you contact an TASSA certified installer who can remove the system safely and properly. Our newest GHOST immobilisers have a specific fingerprint QR sticker that is hidden in different parts of your vehicle. These are linked to our security register. If the system is removed and then is sold on the blackmarket this will allow you to trace the original owner.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. It functions like a smart key and is among the most secure methods to keep your car safe from thieves. The Ghost system will automatically switch on the hazard lights and stall the car's engine when the ignition is on and the vehicle is in a stationary position. This gives the driver or passengers enough time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is again allowed to begin.

The Ghost system, unlike other competitors, utilizes a timer and controller unit which shuts down the fuel shut-off valve 14 after a set period of time. This happens even if the ignition remains on. The delay period must be sufficient to allow the hijacked vehicle owner to get away, and stay a safe distance from the stalled car before the system is reactivated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional security feature that blocks common hacking techniques employed to gain access to modern cars such as relay attacks, key range extending and ECU swapping. This is due to the fact that the auto ghost immobiliser system communicates in a quiet manner and does not emit any signals that can be picked up by a thief using code grabbing or RF scanning technology.

The ghost vehicle immobiliser system comes with the valet or service mode that allows your vehicle to temporarily be started and driven without the requirement for a PIN code. This is perfect for parking your vehicle and have to leave it for a brief period of time, for instance, to put your groceries in the boot, or open a garage door, etc. The system will be able to exit service mode based on speed and time or by using the easy PIN code entry process that gives you total assurance that only you can use your car!

Keyless Entry

Many customers are now looking for extra security measures due to the increasing trend of car thefts using contactless technology. This is particularly applicable to those who have invested time or money into personalising their vehicles and own expensive or rare vehicles. An add-on immobiliser can be an affordable method to stop this kind of theft because it can prevent your vehicle from starting until the correct pin code is entered alongside your key fob.

Immobilisers are designed to be used on a variety vehicle circuits including those which control starter motors and fuel pumps. They can also turn off the car alarm to attract attention and ward off potential thieves.

These devices communicate directly with the engine control unit through the CAN data network and hinder thieves from gaining access to it by installing a new ECU or by using key programmers. These immobilisers are installed discreetly in your vehicle, leaving no marks and are completely inaccessible to the tools sophisticated thieves use.

In contrast to other systems that require a specific application, or a tag that is worn on the person of the driver, a Ghost immobiliser is only disarmed by pressing a series of the existing electronic buttons on your steering wheel, door panel and the centre console, which allows you to choose a custom pin sequence. The pin can easily be changed, making the device as secure as a credit card. It is also more difficult to break since it requires as many as 20 press.

ghost immobiliser reviews also offers a Valet/Service mode that lets you deactivate the system if your vehicle is going to be handed over to valet parking or for service which allows it to work within certain parameters such as 30mph speed limits, so you don't have to worry about your car being driven at a reckless speed. The system can be reactivated using the original key or corresponding entry code.

This makes it the most effective and secure aftermarket CAN-based immobiliser on the market. It is insurance-approved by Thatcham as an add-on for your car when fitted by one of our authorised installers. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact card with your unique QR codes, along with an emergency code that is secure. These are all kept in your wallet or purse.