Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. However If windows with double panes are anchored by internal beading, UPVC window repairs it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you may think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll have to open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit of your window repair, you can tighten screws to secure them in place.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could also be due to the mechanism of the handle wearing out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze It could be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.

It is also important to ensure that the upvc window repair near me hinges are opened and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should be opened.

The problem can be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it is feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes filled with some type of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.