Ghost 2 Immobiliser Problems

The ghost immobiliser fitter 2 immobiliser, designed to guard cars against key cloning or hacking is a discrete device that can be installed without damaging your vehicle. It prevents you from starting your car unless you enter the correct sequence of keys in your vehicle. This is similar to the mobile password.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is accomplished without altering the vehicle, and is undetectable by thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is similar to the ones used by car manufacturers for a long time. However, thieves are unable to overcome it using a brand new key, or key relay technology, as they could with factory-installed systems.

A Ghost can be fitted to any vehicle, van, motorhome, caravan or bicycle with an engine. It is compatible with all popular makes of vehicles. The same system can be used on electric vehicles. It is an excellent alternative to locking the steering wheel and wheel clamps, and can be installed with a minimum of effort.

If the Ghost is activated it will stop all buttons in your car and prevent the ignition being started without a PIN code. This can be done via the Android or Apple mobile app or by entering the code via your key fob. If a code that is incorrectly entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great method to deter thieves. If the vehicle can't be started the thieves will be able to move on.

The Ghost is a small weatherproof device that can be concealed in the most difficult-to-access parts of your car. It is extremely simple to install and takes an average of 20-30 minutes for each vehicle. It is also easy to take off if you decide to change vehicles, or even give it to an auto repair shop or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognised by a number of insurance companies. It also has a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button within the app or by using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which are able to be removed, ghost immobilisers are hidden and integrated into the vehicle. Even if they were to be found, thieves would not be able to start the vehicle. They are nearly impossible to bypass or hack. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing, all of which are methods that are frequently used by thieves to get into vehicles with standard immobilisers.

An immobiliser operates by sending an instruction to the ECU (electronic control unit). If the wrong code is received the vehicle will not be started because the engine will not start up. It is possible to disable a ghost immobiliser with an application program, but it would be very difficult and time consuming to accomplish this. The software can only be installed and used by an authorised installer.

The Ghost immobiliser is a small device that is part of the wiring loom of the vehicle and is invisible to the naked eye once installed. It will not show up on diagnostic systems, there are no LED indicators and it does not communicate with the engine via the OBD port. It communicates silently through the CAN data circuit.

The system won't allow the vehicle to start until it receives an input PIN code defined by the user. The code is entered by pressing buttons on the steering wheels or door panels, or centre console. This is a safer way to safeguard the car because it doesn't need an additional remote control or key fob.

Ghost also comes with a service mode that can be turned on via the mobile application. This lets you hand over your keys to someone else to use for valet parking or service, without needing to enter the disarm sequence.

If your Ghost is in service mode or not you should never attempt to remove the system yourself since it could impact the engine and cause damage. It is recommended to contact a TASSA verified installer who can remove the system safely and correctly. Our latest GHOST immobilisers come with a unique fingerprint QR sticker hidden in various parts of your vehicle. They are connected to our security register. If the system is removed and later is sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. It functions like smart keys and is one of the most secure ways to keep your car safe from theft. The Ghost system will automatically activate the hazard light and stop the engine when the ignition is on and the vehicle is stationary. This allows the driver or passengers time to press a security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

The Ghost system, unlike other competitors, has an electronic timer and controller that shuts off the fuel shut-off valve 14 after a set period of time. This happens regardless of whether the ignition remains on. This delay time period must be long enough to allow the hijacked owner of the vehicle to move away from the scene of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system can be activated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an extra security feature that blocks common hacking methods employed to gain access to modern vehicles like relay attacks keys range extending, relay attacks and ECU swapping. This is due to the fact that the Ghost system is completely silent and does not emit any signals that can be picked up by a criminal using codes or RF scanning technology.

The Ghost system has a service / valet mode that allows your vehicle to temporarily be started and driven, without the need for PIN code. This is great for parking your vehicle and need to leave it for a short period of time, for example, to store groceries in the boot, or open a garage door, etc. The system will be able to exit service mode based on speed and time or through the simple PIN code entry process, giving you complete peace of mind that only you can use your car!

Keyless Entry

Many customers are looking for extra security measures due to the rising trend of thefts from cars using contactless. This is especially relevant for those who have put in time or money in personalizing their vehicle or own expensive vehicles. An immobiliser add-on can be a cost-effective way to prevent this type of theft as it can prevent your vehicle from starting until the correct pin code is entered into your key fob.

Immobilisers are made to work with different vehicle circuits, including ones which control starter motors and fuel pumps. They can also turn off the car alarm in order to attract attention and scare away potential thieves.

These devices are directly connected to the engine control unit through the CAN data network. They prevent the thief from bypassing it by installing a replacement ECU or by using key programmers. These immobilisers are installed discreetly and leave no marks in your vehicle. They are also not detected by hi-tech thieves' tools.

Unlike other systems that require a separate application, or a tag that is worn on the driver's person the Ghost immobiliser can only be disarmed by pressing a pattern of electronic buttons that are already present on your steering wheel, door panel, and centre console, allowing you to choose a custom pin sequence. The pin can easily be changed and makes the device as secure as a credit card. It's also more difficult to crack because it requires up to 20 press.

Ghost also has a Valet/Service mode, which allows you to deactivate it if you intend to give your vehicle to valet parking, or for service. This allows the system to function within certain parameters like a 30-mph speed limit. It is then reactivated by using the original key or key that corresponds to the entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser on the market. It is insurance-approved by Thatcham as an add-on to your vehicle when installed by one of our certified installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels and an ISR contact card that contains your unique QR code as well as an emergency number that is secure, all of which you keep in the wallet/purse of your car.