Double Glazing Lock Repairs

Quality locks on your windows and doors will stop burglars from getting into your home. They aren't likely to break glass or attempt to squeeze through windows.

Some double glazing owners, however, have experienced problems with their window or door lock after the installation. These problems can often be solved without the need for new double glazing.

Broken or damaged locks

A locksmith can repair your uPVC window or door lock if it is broken or faulty. They can repair hinges, striker plates and locks for double-glazing. They will also be able to move the cylinder around to fix any misalignment issues that may be causing your handle to not operate properly.

If the key fits into the lock but doesn't turn or is difficult to insert the mechanism might be locked up. This can be due to grime or dirt getting stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon but not oil as oil can attract dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you must insert the key and try to turn it. The lubricant will work its way through the mechanism, and the lock should be able turn with ease.

The loose screws inside the lock mechanism are another reason for a broken lock. They can become loose and fall out, or even break off completely, preventing the lock to work properly. These screws can be tightened using the help of a screwdriver. However, be careful not to overtighten them. This can damage the internal components.

A broken lock can be hazardous for you and your family. This is especially relevant if you have young children. They can easily unlock the door without your knowledge, giving them access to your house. If you are worried about this happening, a vetted locksmith can provide a quick and efficient service to secure your double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and damaged mechanisms on uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.

Handles that are broken or faulty

Many double-glazed windows have a multi-point lock as a part of the overall security package. This is a great choice for those who are concerned about potential thieves who may try to gain entry to your home. It's also worth asking your locksmith about anti-lift blocks that can be installed in addition to the locks that are already in place to ensure that your window is locked in the closed position.

It's not uncommon for the handle locks to get damaged or even fail - they are the first part of your window that could be forced open by criminals who want to break into. The good news is, this is one of the easiest parts to fix.

Modern uPVC handles and aluminum handles come with a multi-point locking mechanism known as Espagnolette that is designed to resist forced entry. This security upgrade is usually offered as an optional extra on new uPVC window doctor near me installations. Older style upvc repair and aluminium handles can be upgraded to shoot bolt locking systems and again as an additional extra on new double glazed windows.

If a handle is damaged, it is essential to get the handle repaired as quickly as possible. Faulty handles can prevent the window from closing correctly and letting in a draft. It may also be a weak point that opportunistic burglars could exploit, putting your belongings and family at risk of theft.

To repair the damaged mechanism, first gain access to the window frame and remove the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified, so that a replacement may be found that is in line with the profile of the internal window frame mechanisms.

Once the mechanism is replaced, the handle can be fixed using the original screws however, we generally recommend replacing them with more long screws because this will ensure an even more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further corrosion. Once that's done your window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are broken or Faulty

If your windows don't close correctly, draughts may enter your home, the security measures will be compromised, and there is an increased risk of damp or water damage. Broken or damaged window hinges are a typical problem that can be fixed easily.

If you have a window made of uPVC that won't close or open it's likely that the hinges are damaged or broken and require replacement. Most window companies will require you to purchase an entirely new window unit to resolve this issue, but we are able to replace the hinges and save you money.

Window hinges are often damaged through repeated use, or weakened over time by corrosion. If you find a damaged hinge, it is important to take precautions to avoid further damage by taking care not to make the window swing open or closed.

Identifying your hinge type will help you locate the right parts to repair it. Common types of window hinges are Maco, Mila, Roto and many other brands. Consult a professional to avoid buying parts that do not fit into your existing hardware. This can cause more damage.

A faulty hinge is a major problem for uPVC doors and windows. They can be a major source of noise and also allow water to infiltrate which can damage your windows.

To resolve this issue, first check whether the pin barrel on both sides of the hinge is aligned. If it isn't, tap the head pin with a hammer to make an arc in the barrel of the hinge. This will help to keep the pin in the right position. A friend can help you hold the doors while you take out hinge screws and hinges. Replace the hinges with those that are of the same size, and attach the screws using glue. Finally, while the glue is drying, secure the hinges by using clamps or weights.

After your hinges have been repaired and repaired, you should be able to re-install the door and re-attach the handle. Replace the screws using wood dowels of the same size as the original screw to ensure they are in line.

Broken or damaged glass

While uPVC windows do a great job of keeping cold out and warm in, they may become damaged over time. This could include cracked or damaged glass and faulty locks. If not taken care of, it can become a very costly issue. It also can detract from the appearance of your home and could lead to a loss of insulation, which is why it's important to repair any damage as soon as you can.

If your glass has cracked but not shattered it is possible to fix it yourself using the appropriate tools and techniques. First, make sure that the area around the glass is free of debris so that any shards don't harm anyone and aren't an accident-prone area. Then, remove any broken glass pieces and dispose of them in a proper way. Apply masking tape across the entire area. This will prevent glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window it's a good idea pre-fit the pane of glass before gluing it back into place so that you know you'll have enough room to complete the project.

Before applying the glue, clean the surface of the damaged frame and the glass with an unclean, dry cloth. Follow the directions for application and curing times, which can vary from product to product. Depending on the direction of the crack, you may want to clamp the glass while it is curing. You can do this using lightweight clamps that are specifically designed to support fragile materials.

Once the adhesive has fully cure, carefully insert the glass inside the window frame. Make sure it's aligned with the frame's edge and that there aren't any gaps between the glass sash and the frame. Be cautious not to flex the window when it's being put back in place, as this can weaken the seal and lead to water infiltration and condensation.

Contact a professional glazier such as O'Brien(r), to arrange a replacement if your glass window is completely broken. It's crucial to act fast when you notice broken glass.