Repairs to uPVC Windows

upvc window repair is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case you'll need source some plastic spacers that help the new pane to fit properly into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap between the window and the door is large, you might want to use security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to move the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and do an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is important to act if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens with the breeze. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical part hinges will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

It is also important to verify that the upvc window repair hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should open.

The issue can be caused due to opening the window in the wrong way or a faulty installation in the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to give advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop between the sash and the frame. If they are beyond repair, it may be required to realign them. In addition, the interlock could also become disaligned. This is located on the hinge's side and could require to be cleaned. In some instances it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window repairs near me sill. These will keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. It is crucial to recognise that all windows have a life span and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.