Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Cleaning and Double Glazed Window Repairs lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double glazed window repairs (link)-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled under.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, Double Glazed Window Repairs close the window and test it for fitting. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you aren't able to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it can also be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an experiment fit. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Based on the severity of the problem the caulking used previously might need to be removed before a fresh layer is applied. It is essential to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window repair.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. Changing a window hinge is essentially a simple process, but it's simpler if you have someone to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or by poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you suggestions.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also become disaligned as a result of wear, causing an opening where the sash meets frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may be misaligned. It is located on the hinge's side, and might require to be cleaned. In some cases it is possible to replace these.

The seals may wear out or become damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen draughts.

Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is cheaper to replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.