Door Handle Replacement

Door handles seem like something minor, but if you dislike the style or design of them, or are unable to use them, it's worth replacing them. Installing a new door handle is simple if you've got patience.

Modern door handles are equipped with cover plates that hide the screws to give them a beautiful appearance. However, you'll need to attach them separately if your new handle doesn't already have them.

Removing the Old Handle

Door handles are not only essential for aesthetics of your home, but they're also vital for safety since they allow you to lock and unlock your door. As time passes, the door handle may become loose or feel a bit loose. It could also begin to look old and worn. This is a good indication that it's time to replace your door handle.

If your door handle is becoming difficult to use, it might be time to replace it. This is a serious problem because you won't be in a position to lock or unlock the door and put your family and yourself at risk.

Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be quite dangerous, especially if your children or elderly family members have difficulty opening it, and get trapped inside. It's easy to replace a broken handle on a door.

The majority of modern door handles are a standard size, so they are suitable for any door. If you are not certain if your new door handle replacements handle will work, take off the old one and measure the holes in its housing. This will allow you to buy the right door handle.

The most straightforward method to take off the door handle you have been using is to unscrew it from the door itself. This is usually done using the screw driver. Some door handles have an enclosure plate that hides the mounting screws. It is necessary to remove the cover plate to gain access to the screws. After you've removed the old handle, make a note of how the spindle is connected so that you can align it when you fit your new one.

Alternatively, you can remove your door handle by unscrewing it from the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which should be on the edge of the trim piece. Once you've removed the latch, unscrew the handle from the strike plate and then the latch off the door's edge.

The Strike Plate

If you are replacing the handle, you'll be required to replace the latch plate, which is the hole that the door's latch hooks into when it closes. The packaging that the new handles arrive in will have two options for latch plates: one that is rectangular and the other circular (see the diagram above for the components of a door handle). If your current latch plate is rectangular in shape, swap it to a round one, so that the latch hooks into the strike plate in a manner that makes the handle easier to operate.

The first step is to take off the screw holding the old latch plate. The screws are usually quite tight and require a fair amount of force to loosen them. If you are able, it could be beneficial to have a second person assist with this part.

The latch plate should easily lift itself out of the upvc door locks and handles after the screws have been removed. If it is stuck or doesn't move using a nail file to scrape around the edges of the latch plate. This can help loosen the plate.

Now you can move on to creating the new door strike plate to be installed. Utilizing the wood screws that were included with your new handles, attach the latch plate to the inside of the doorjamb. Do not overtighten your screws because this could damage the strike plate.

If you're not sure whether the latch plate is in the proper position, shut and open the door to see whether it locks and closes properly. If it does not, you will need to adjust the strikeplate up or down or forward or back until the door shuts correctly.

If the door still moves or jiggles, you may have to expand your latch hole on the strike plate. This is more frequent in older doors, however it can happen due to wear and tear, hinge mortises that are not deep enough or the wrong size for the latch, or because of a broken or damaged strike plate that is damaged or broken. If this is the case, follow the same procedure as adjusting the strike plate, but with a metal file instead of the hammer and chisel.

Removing the Latch

The latch is an angled metal piece that slides in and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also hooks in the door frame to ensure that the door stays closed. If your door wiggles when you close it, changing the latch could be all you need to fix it.

The screws that hold the door latch are hard to spot however, you can insert a screwdriver into a small hole on the trim plate, and then pull the latch off. After you've removed the trim plate, it'll be simple to remove the latch and the remaining bolts that hold the spindle and latch in the position.

If the latch is not easily removed, use a paperclip or tool to take it off the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the handle and latch begin to split. You may have to do this several times before the latch is loose enough to allow it to be pulled out.

It should be possible to slide the new latch into its slot with no issues after you've removed the old one. Use the new screws to secure the latch to the strike plate or door frame. Make sure it is properly positioned in the slot, aligned with the screw chambers.

Measure the existing backset (the distance between the centre of the large hole on the door's Double Glazed Front Door Handles and the edge) before installing the new handle. Also, ensure whether the size of the latch on the new handle is a good match to this measurement.

If you're replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you will need a new one. If you're not changing the locks the new latch will fit into your existing recess and will work just fine with your current keys. Make sure you select a latch with a rectangular cover plate that match your old handles for double glazed doors.

Removal of the Cover Plate

You can replace your old door handles with a modern lever and rose design to enhance the appearance of your home. You can purchase complete sets that include matching escutcheons and privacy adaptor kits.

To replace the door handle inside, remove the cover plate (or rose), which covers the screws and inner mechanism. Use a flathead for removing the cover plate. It could have a slot along one edge or be held in place by pins.

Remove the screw that is holding the handle in the interior and set it aside once the cover plate is removed. It is also necessary to remove the screws that are holding the latch and the plates inside to the door, which you can accomplish by loosening them with a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.

Most doors have gaps between the jamb of the door and the edge of the frame that allows for a handle, but not all have. If yours isn't, you will need to drill a new hole through the door. This is the same procedure as opening a locked door however you'll need to be extra careful not to damage the door or frame.

After the holes are drilled then you'll need to install new screws for the door knob. Make sure to buy the same size as the previous ones, to ensure that you do not end up with the handle that is too tight or loose. It's also necessary to install the new latch plate and strike rod that aren't included in the majority of door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic option if you're in need of a top-quality interior door handle replacement set. It's factory-fitted and has received hundreds five-star reviews. It's a great choice to replace worn or damaged door hardware on your Chevy.