Repairs to uPVC Windows

uPVC is a fantastic option for upvc Window repairs modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not corrosion or rot.

Regularly cleaning and lubricating upvc window repairs near me windows and doors is vital. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass so that any shards fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window repair near me is beginning to sag it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close your window and do an experiment fit. The joint at the corner of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most frequent reason for Upvc Window Repairs leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window, but it's easier if someone else helps hold the frame.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become unbalanced due to wear, which can cause gaps where the sash meets frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window and can also become misaligned, again it may be possible to just give them a clean but in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will reduce the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide a great level of insulation and security for your home. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them than to repair them. So, if you're having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.