UPVC Replacement Door Handles

As time passes the handles on your doors will wear down and will require replacement. When doing this it is essential that the new handles conform to the critical dimensions of the old handle.

The top screw's location the lever, and the keyhole dimensions are the three measurements you need to verify. Use the size guide to help you.

Inline Lever/Lever

A lever door handle is a contemporary handle that can be put in on replacement or new doors. This kind of handle is available in many designs and finishes. A number of manufacturers offer this handle including Avocet, ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are constructed of durable materials and are perfect for multi point lock doors that require a strong design. The handles are inline and run off the same spindle and screw fixings, so they are easily installed on doors made of uPVC/Composite, either new or old.

The design of the sprung lever allows the handle to be placed and angled for comfortable operation and is suitable for all users. The handle has been endurance tested to 200,000 cycles, which allows for the assurance of the quality of the finish and performance of the handle over time. The sprung lever is also adjustable to accommodate a wide range of locks. This is useful for doors with narrower openings where the cylinder is further back in the victorian scroll door handles. A shorter lever is an ideal choice for doors that have latches that can be activated by the thumb turn inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently to the lever type handles on doors. The handle can use a single spindle (inline) or independently from each side using two offset or inline spindles (pad). They are generally used on UPVC double-glazed doors and come in a variety of styles and styles.

The handles have been tested to at least 200,000 cycles and are available in a variety of finishes like White and Silver, as well as Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high degree of durability and performance for the intended use.

All UPVC handle lever pads include a spindle and screws and can be mounted on the uPVC patio door handle with lock. The backplate fixing centres of 211mm allow for a larger size of handle which is often a benefit when replacing a faulty or worn multi-point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles that slide out of their horizontal position when not in use.

When selecting the replacement upvc door handle handle and spindle, it is crucial to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is also called the "handle centre" or "cylinder centres and is an essential aspect to match the correct handles.

Once you have the correct PZ size, you'll have to ensure that the handle lever pads and push pads are in a suitable shape for the American with Disabilities Act (ADA) compliant handles that you need for your doors. These are typically square or round with an internal lever, and an external push pad.

Most of the UPVC lever pads we sell are sprung, meaning that they will return to their horizontal position after not in use, rather than hanging out and potentially sticking in the frame. This keeps draughts out of the home. The majority of UPVC lever pad handles are available in left and right handed versions, allowing them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are found on uPVC and other kinds of doors. Cylinder locks are operated with a key that unlocks the cylinder's casing. The case is then able to reveal pins that can be aligned to those in the lock, allowing them to rotate the camera that rotates, opening the door. Euro cylinders can be fitted with up to six pins. External and internal doors require different levels of security.

The choice of the correct cylinder is crucial; it depends on the way your door and handle are used. External doors, for instance should be equipped with higher security cylinders, whereas doors inside can be secured using a standard cylinder. Additionally, certain cylinders come with additional features that can improve security, for instance anti-drill or anti-bump properties.

To ensure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, should there be one. If you cannot measure with the lock in position, you can remove it. A cylinder that protrudes beyond the handle and escutcheon might be vulnerable to attacks, such as snapping locks, therefore it is important that it is not too long.

The majority of modern cylinders have been constructed with anti-drill and bump resistance features that are built into their design. These features are designed to minimize the chance of a attack by forcing the cylinder rotate in an opposite direction. This helps stop the attack and keep your doors safe.

There are cylinders that are constructed to withstand snapping. This is an increasingly common method of attack on cylinders where the break line inside the lock is smashed with a special tool to snap off the front of the cylinder to allow the door to be opened. This is a quicker and easier way to gain access than through the use of a multipoint locking system. It also leaves less evidence of the burglary which could hinder insurance claims.

Spring Cassette

This spring cassette sits within the base of your door handle's backplate, supplying a spring-loaded solution that returns your multipoint lock handles to their normal position after usage. The handles had no spring and would droop when the locking mechanism was removed. This simple part is the most effective way to fix this problem. It also stops your door from becoming stuck in the open or closed position as they aren't easy to close manually.

These spring cassettes have been specifically made for use with multipoint locks that are sprung, they will not fit unsprung multipoint handles and you must have a bespoke hole cut into the backplate to allow them to fit (please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes in the backplate of the door handle for patio door for many brands of uPVC doors. They are fitted with a square cut-out that accommodates an 8mm spindle and are available in a variety of.

These spring cassettes are an excellent value solution to the problem of door handles that are sagging. These spring cassettes are simple to install and will extend the lifespan of your uPVC door. For more information about our range of uPVC accessories and spares, contact us today. in contact with our team. We are available to assist and offer professional advice.