Double Glazing Lock Repairs

Quality locks on your windows and doors will help prevent burglars from getting into your home. In general, they don't enjoy breaking glass or trying to wiggle through open windows.

Certain double glazing owners however, have had issues with their door or window lock after installing. Fortunately, these issues can be fixed without having to buy new double glazing.

Broken or damaged locks

If your uPVC door or window lock is damaged or broken or has a problem, a locksmith will repair it for you. They can repair hinges, striker plate and locks for double-glazing. They will also be able to move the cylinder around to fix any misalignment issues which could cause the handle to not function correctly.

The mechanism may be locked when the key is inserted into the lock, but it does not turn or is difficult to insert. Grease or dirt can be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate it. Use a dry lubricant like graphite or Teflon, not oil, because oil can attract dirt and cause it to stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should get into the mechanism and the lock should be able to turn effortlessly.

A malfunctioning lock could be caused by loose screws inside the mechanism of the lock. They can become loose, fall out, or even break completely preventing the lock to work properly. A screwdriver is a tool to tighten the screws however, caution must be taken not to tighten them too much, as this can damage the internal components.

A damaged lock can be dangerous for you and your family. This is especially true if you have small children. They could easily open the door without knowing and gain access to your home. If you're worried about the possibility that this might occur, a licensed professional locksmith can assist you to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always necessary.

Handles that are broken or are damaged

As part of their overall security package, many double-glazed windows have a multipoint lock. This is a great choice for those concerned with criminals who are looking to gain entry to your home. It's also worth asking your installer about anti-lift locks, these can be fitted on top of the existing locks and ensure that your window is locked in the closed position.

It's not uncommon for handles to be damaged or even fail - they are the first part of your window to be pushed open by a criminal intent on breaking in. The good news is that this is one of easiest parts to fix.

Modern uPVC handles and aluminum handles come with the multi-point locking mechanism referred to as Espagnolette that is designed to resist forced entry. This security upgrade is offered as an option for new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed windows.

It is crucial to fix the handle as soon as possible if it is damaged. Faulty handles can prevent the window from closing properly and letting in a draft. It could also be a weakness that burglars with a plethora of opportunities might exploit, putting your family and belongings at risk of being stolen.

To repair the broken mechanism, you must first access the window replacement near me frame, then take off the damaged handle. The gearbox can then be accessed to determine the kind of gearbox used to open the handle. This allows a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism has been repaired, the handle may be reattached using the original screws. However, we suggest replacing them with larger screws since they provide the most secure fit. The final step is to apply a layer of clear sealant to protect the handle from further rust. After that your window will be operational again and at only a fraction of the cost of replacing the entire window replacement.

Hinges that are broken or Faulty

If your windows don't close properly, Window Doctor draughts could be able to enter, your home's security measures will be compromised, and there is an increased risk of water damage or damp. Broken or damaged window hinges are a typical problem that can be fixed easily.

If you have a uPVC windows that won't open or close, it's likely your hinges are broken or damaged and require replacement. Many window companies will require that you purchase a new window unit to address this issue, but we are able to replace the hinges and save you money.

window Doctor hinges are usually damaged by repeated use, or they are weakened over time by corrosion. If you've got a broken window hinge, it's crucial to take the necessary precautions to avoid further damage. This includes not causing the window to close or open.

Knowing the type of hinge you have will help you locate the correct parts to fix it. The most common types of window hinges are Maco, Mila, Roto and a variety of other brands. Get advice from a professional before purchasing parts that will not fit into your existing hardware. This could cause more damage.

A faulty hinge is a major problem for uPVC doors and windows. They can be a major source of noise, and they could also allow water to get into your windows.

Verify whether the pin barrels on both hinge halves are aligned. If it isn't then tap the head pin with an hammer to create an arc in the barrel of the hinge. This will help keep the pin in place. Then, ask a friend to hold the door as you remove the hinges and hinges from both the doorjamb and the door. Replace the hinges with those that are of the same size, and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.

Once you have repaired your hinges, you can install the door again. You could also reattach the handle. It is a good idea to replace the screws with the same length of wood dowels as the original screw so that they align with each one.

Glass that is Broken or Faulty

While uPVC windows do a great job of keeping the cold out and heat in, they are susceptible to becoming damaged over time. This can be the case with broken or damaged glass and faulty locks. If neglected, this could turn into a major expense. This can also detract from the appearance of your home and can cause a loss of insulation. It is crucial to repair any damage promptly.

If your glass has cracked, but not broken, you can usually fix it yourself using the right tools and techniques. Make sure that the area surrounding the broken glass is free of debris so that any pieces of glass do not cause injuries or cause a trip hazard. Remove any broken glass pieces and dispose of them in the appropriate way. Apply masking tape across the entire area. This will stop shards of glass from sticking to your skin and scattering when you move them. If you're dealing with a double-pane glass it's best to pre-fit the pane of glass before gluing it back into place so that you are sure you'll have enough space finish the project.

Before applying the glue wipe the surface of the broken frame and the glass with a a dry, clean cloth. Follow the directions for application and curing, which can vary from product to product. You may have to clamp the glass that has cracked with lightweight clamps designed to hold fragile materials, based on the angle.

After the adhesive has set, carefully place the glass in the window frame. Make sure it is in line with the frame edge and that there aren't gaps between the glass sash and the frame. Be careful not to bend the glass when you reinstall it, as this could weaken the seal. This can lead to condensation or water infiltration.

If you have a glass window that's broken completely or has bigger cracks, call a professional glazier such as O'Brien(r) to arrange the replacement. Leaving broken glass unattended can pose a safety risk for pets and children It's therefore essential to act quickly.