Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this case you'll need to source some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you're planning to try to remove the window panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed from the Window repair, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can reach the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is essential to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC handle. First, you'll need close your window and do an experiment to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Windows that leak water do are not just a cause for degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens with a breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It is very easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.

It is also crucial to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become disaligned as a result of wear, causing gaps where the sash and Window Repair frame meet. These can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be placed over your window repair near me sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.