Choosing the Right UPVC Door Handle Replacement

It's easy to replace your handles made of upvc however, choosing the correct handle can be a bit difficult. The majority of modern double-glazed handles for doors have spring cassettes built into the handles, but older ones don't.

If your upvc handle is loose and floppy, there could be an issue with the internal parts of the multipoint lock. This article will address the various possible issues and their causes.

Handles that are drooping or sagging

uPVC handles are susceptible to wear and wear and. This is particularly true in older properties. The most common reason that a handle becomes floppy is due to a broken spring cassette in the door lever. This is caused by excessive force and the square spindle that holds the cassette may be dislocated or rounded.

The good news is that a uPVC door handle replacement is an easy task and can be done in a matter of minutes. The first step is removing the handle unit that was previously used. To do this, unscrew the fixing screws on the backside of the lever. After the handles have been removed, you can then remove the cassette from the square spindle and replace with a new one.

Online you can choose from a range of uPVC handles available in a variety of finishes. The finish you choose will determine the length of time the handle will last and how easy it is to keep clean. Finishes like Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.

Once you've selected a colour or style you can choose the type of handle you need. The most popular types are pad and lever arrangement. Lever pads are typically used to block access by unauthorised persons. They feature an inside lever and a paddle on the outside.

The next step is to determine the dimensions of your current handle and note them down. You will need to know the PZ dimension (the distance from the screw hole to the center of the lever) as well as the length of the handle, and the dimensions of the keyhole. Once you have the measurements you can compare them with the handle sizes matrix to determine the right replacement.

Broken springs

Over time, the handles of uPVC doors can get loose or wobbly and at times the spring cassette inside might break. The springs are used to make sure that the lever of the handle is in a horizontal direction. Without them your doors will not lock properly.

Modern uPVC handles have these cassettes built into the back plate. However, older uPVC doors typically contain these springs within the actual lock mechanism. This isn't something that can be fixed by yourself, but it's worth contacting your locksmith to take a look at as this could be the reason for the sagging or drooping uPVC door handles.

One of the most common problems associated with uPVC door handles is that they get loose or wobbly over time, and this is typically due to worn springs that can be an easy fix. This is typically caused by excessive handling of the handle. The square spindle of the handle wears down and causes the springs to move.

To fix this, you will need to open the door towards the handle plate and then remove all screws. This can be done using a Philips screwdriver. Once the screws are removed, the handle can be removed and the handle plates pulled apart carefully. The old springs can be removed and replaced with new ones.

Depending on the kind of handle you have the distance between the two fixing screws may differ and it is important to know when buying a replacement. This measurement is referred to as the PZ measure. It is recommended that this is done using an instrument that is calibrated in order to be accurate.

After reinstalling the springs, you should be able to use the handle with no issues. However, it's always important to grease the internal mechanism to make sure that everything is working just as it should. This will not just ensure that your uPVC doors are as safe as they can be but will also make them more comfortable to use for a long time.

Handles that slide around

Handles that slide around could be caused by a number of things, one of the most frequent causes is when the handle levers aren't aligned properly with the lock. This can happen with uPVC doors as well as composite doors. However, it's more evident on older doors because they are made of cheaper materials that do not hold up to the elements.

This issue can be resolved by a professional, who will realign the handles and ensure that they are in line with the door lock. They will also look at the lock itself to determine what requires fixing. In many cases, a slight adjustment to the springs of the handle can fix the issue.

Switching your uPVC door handle is easy enough, but it's crucial to take the measurements of the handles you have in place to ensure that you have the proper size replacement. You'll need to take measurements of the distance between the two screws, as well as the size of the keyhole and lever, as well as the distance between them. Then, you can make use of this uPVC handles size guide to find a replacement for your home.

Once you have the measurements then the next step is to eliminate the current uPVC handles. This is usually fairly straightforward and requires only a screwdriver to reach the screws on the interior of the door. Once the screws have been removed, you can remove the handle and then proceed to install the new handle.

Before you start the work, you should ensure that the door is secured open by a wedge to prevent it from closing in the middle of your work. After removing the handle, you'll be able to access the parts beneath the door that are causing the door to slip.

If you don't have the time or energy to tackle this job yourself, a handyman from Fantastic Services can help. They will employ sophisticated lock picking techniques to unlock the doors without creating damage. Then they will replace the broken handle and make sure everything is working just as it should.

Gearbox damage

A damaged gearbox could cause the door handle made of upvc to become stiff or lose function. The lock could also not be able to opened with a key. This can be very dangerous and should be dealt with as soon as possible. It is important to call a locksmith if you cannot solve the issue yourself. They have the equipment and knowledge to do the job right.

The first step is to take the handle from its cover plate. You can do this with a screwdriver that has an angled tip. After you remove the handle, remove the middle screw that is holding the cylinder. Once you have removed this middle screw, you can then loosen the two screws that secure the barrel. Then, you can remove the barrel from the door. You'll need to prop the door open to accomplish this, so make sure to have someone available to help.

After taking the cylinder off you can replace it with a new cylinder. Make sure that the new cylinder has the same size as your old one. Otherwise, you could end with an unaligned handle correctly. This could cause various issues that could cause leaks and draughts.

A lot of door handles made of upvc have slots that allow for adjustment. These slots can be used to tighten and loosen the handle. These are usually located on the inside of the door close to where the handle meets the cylinder. Allen wrenches can be used to tighten the slots of adjustment. Once you have made the adjustments then you can put the handle back on and screw it back into. Then, you can test the handle to make sure that it is working correctly.

If the upvc door handle becomes loose or floppy when it is closed, it is typically an indication that the upvc gearbox has broken down or internal spring components are in the process of breaking down. This could cause your multipoint locks made of upvc to fail leaving your aluminium door handle open to burglars. In this situation the gearbox made of upvc must be replaced. It will cost between PS145 and PS280, including labour.