Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, UPVC window repairs it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window replacement frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window so that you can access the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it could also be caused by the handle mechanism getting worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be put on. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. It is essentially a very simple process but it can be easier to do if you have someone to help you hold the frame up.

It is also important to ensure that the upvc window repairs hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. If they're beyond repair, it could be required to realign them. The interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to give them a clean but in certain cases, it may be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs, your upvc windows will provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as possible.