Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going attempt to remove the glass panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is large, you might be interested in the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may develop a number of problems, including sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer is applied. It is important to keep in mind that when it is about uPVC window repairs, Window Repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease it could be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should open.

The issue could be caused either by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you advice.

It is also important to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window repair near me.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges may also become unbalanced due to wear, causing an opening where the sash meets frame. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window, may be misaligned. Again, window repairs it's possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come an point at which it is more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.