Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However If windows with double glazed window Repairs Near me panes are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this instance you'll need to locate some plastic spacers that aid the new pane in being able to fit properly into the frame of the window.

If you're planning attempt to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your property until a professional is able to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is significant, you may need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they are susceptible to a range of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll have to open the window so that you can get to the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, Double glazed window repairs near me close your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you can't reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them and that the sill pan is properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It is very easy to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or a faulty installation in the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window repairs.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause gaps to develop between the sash and the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can also become misaligned. It is located on the hinge side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc window you should consult a professional as soon as possible.