Repairs to upvc window repairs (Click On this page) Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to locate some plastic spacers that will assist the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the distance between the door and the window is significant, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wearing out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, upvc window repairs and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might need to be removed before a new layer is applied. When it is time to uPVC repair, you should avoid over-caulking. This can make your window more difficult to clean and decrease its energy efficiency.

Check that any drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or upvc window repairs loose and open in a breeze it could be hinges that are at the fault. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical part hinges will wear out over time. It's easy to change the hinges on a window however it is easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us photos via our website will often resolve the problem. We are more than happy to provide advice.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. Firstly the hinges, again due to wear and tear could become misaligned. This causes an opening to appear where the sash joins the frame. These can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. In addition, the interlock could be disaligned. It is located on the hinge's side and might require to be cleaned. In some cases it is possible to replace the hinges.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

One of the most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more efficient to replace them than repair them. If you encounter any issues with your Upvc window, it's best to consult an expert immediately.