Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and Upvc window repairs long-lasting. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act as soon as you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose upvc window repair near me window handle yourself. First, you'll need to shut the window and do an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may require removal before a new layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window repairs. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is an easy process, but it's simpler when you have a person to help hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to offer advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also be unbalanced due to wear, which can cause a gap between the frame and sash. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side and might require to be cleaned. In certain instances it might be necessary to replace them.

The second most frequent cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes filled with some sort of filler and can be placed on the windowsill on top. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it is more cost-effective to simply replace them than to repair them. So, if you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.