Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window replacement near me has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. However, if windows with double panes are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. Over time, sash they can develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Water leaks from windows can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open in a breeze, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part, hinges can wear out over time. Changing a window hinge is an easy process but it can be easier to do when you have a person to help you hold the frame in place.

Check that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. First, the hinges due to wear and tear can become misaligned, this can cause a gap to form between the sash and the frame. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window and can also be misaligned, and again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The second most frequent reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc repairs window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce draughts is by using an draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking out cold air.

With a little maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. It is essential to remember that all windows will eventually wear out and it could be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your window made of upvc you should consult a professional as soon as you can.