Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation you'll need to find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled under.

After the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and repair the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems that include sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose upvc window repair hand. The first step is to close the window and perform an experiment to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is important to take action if you awake each day to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may have to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will make your window more difficult to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is related to the seal, not the frame. Again this can easily be repaired by an upvc window repair window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze, it may be hinges at the fault. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It's easy to change the hinges on a window, but it's easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear can become misaligned, this causes gaps to develop where the sash meets the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. Second, the interlock can also become unbalanced. It is located on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window repairs with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen the possibility of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, upvc window Repair these are typically fabric tubes which are filled with a kind of filler. They can be placed on the top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is cheaper to replace them rather than repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as possible.