Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to try to remove the window panes by yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional comes out to repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap between the window and the door is significant, you may need to consider an alarm system that has windows. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for fit. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. When it comes to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and lower its energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage occurs between the double glazing-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc window repairs window is difficult to open, or if it blows open with a breeze. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do if you have someone to help you hold the frame in place.

Make sure that the uPVC hinges are open and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give advice.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock may be disaligned. It is located on the hinge side and may need to be cleaned. In some cases, uPVC repair it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and UPVC repair repairs your windows made of upvc will provide a great level of insulation and security for your home. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.