Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double glazed window repairs-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the glass panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor, where they could be trampled under.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the door and the window is substantial, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws until they stay in position.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes do not have debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

Check that the upvc window repair hinges are closed and Double glazed window Repairs open in the proper direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you advice.

It is also essential to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also become unbalanced due to wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it could be necessary to have them realigned. The interlock, which is located on the hinge side of the window repair, may also be misaligned, and again it is possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals. These can become worn down or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional as soon as you can.