Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going attempt to remove the glass panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues like sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. With the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window doctor and verify the fitting. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is important to replace your seal as quickly as you can in order to ensure that your uPVC window replacement waterproof and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in the breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to change the hinges on a window however it is easier if someone helps you to hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. Sending us photos through our website can often resolve the problem. We are more than happy to provide suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges, also because of wear and tear, can become misaligned, this causes gaps to develop where the sash joins the frame. If they are beyond repair, it could be required to realign them. The interlock may be unbalanced. This happens on the hinge side and may need to be cleaned. In some instances, it may be necessary to replace them.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and uPVC repair security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and they may reach an point at which it is more economical to replace them than repair them. If you have any problems with your upvc window it is recommended to speak with an expert as soon as possible.