Double Glazing Lock Repairs

Quality locks on your doors and windows will stop burglars from gaining entry into your home. They don't usually like to break glass or attempt to get through windows that are open.

However, some double-glazing owners have had issues with their door or window lock after it was installed. These issues can be solved without the need for new double glazing.

Broken or Faulty Locks

If your uPVC window or door lock is broken or faulty, then a locksmith can fix it for you. They will be able to repair the striker plates, hinges and locks on your double glazing repair-glazed. They can also move the cylinder in order to fix any misalignment which could be causing your handle not to function properly.

If the key fits into the lock but doesn't turn or is difficult to insert then the mechanism may be seized up. This can be caused by dirt or grime accumulating inside the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon but not oil as oil can attract dirt and cause it to stick to the mechanism's inside. After the lubrication, insert the key into the lock and turn it. The lubricant should get into the mechanism, and the lock should be able to turn smoothly.

Screws that are loose within the lock mechanism are a different reason for a broken lock. They can loosen, fall out, or even break off completely, preventing the lock to work properly. These screws can be tightened using a screwdriver, but be careful not to over tighten them. This can damage the internal components.

A broken lock can be hazardous for you and your family. This is particularly the case if you have children. They could easily open the door window Replacement Near Me without knowing and gain access to your home. If you're worried that this could happen, a vetted professional locksmith can help secure the double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and damaged mechanisms on uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your particular needs, which means that in a lot of cases replacement windows and doors are not necessary.

Handles that are damaged or faulty

A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those concerned with criminals who are looking for ways to gain access to your home. It is also a good idea to ask your installer about anti-lift locks which can be put in in addition to the locks already in place and ensure that your window is locked in a closed position.

It's not uncommon for handle locks to get damaged or fail - they are the first part of your window that could be pushed open by criminals who want to break in. Luckily, the good news is that this is among the easiest parts to fix.

Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism known as Espagnolette, which is designed to resist forced entry. This security upgrade is available as an option with new upvc window repairs windows. As an optional upgrade, older style handles made of aluminium or uPVC that are no longer used can be upgraded to shoot bolt locking systems.

If a handle is defective, it is essential to get the handle repaired as soon as is possible. Faulty handles may prevent the window from closing properly and permit drafts to enter. It could also be a weakness that thieves who are opportunistic could exploit and put your family's possessions and your personal belongings at risk.

To repair the broken mechanism, you must first gain access to the window frame and remove the damaged handle. The gearbox can then be accessed to identify the type of gearbox that is used to open the handle. This will allow an alternative that is compatible with the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can be returned to the original screws. We recommend replacing them with longer screws to ensure the most secure fit. The final stage is to apply a layer of clear sealant to protect the handle from further corrosion. After you've completed this step your window will be functional again, and at a fraction the cost of replacing it.

Hinges that are broken or Faulty

If your windows aren't shut properly, draughts can enter your home, the security barriers will weaken and there's the risk of damp or water damage. Broken or faulty window hinges are a common issue that can be fixed easily.

If you have a uPVC windows that won't close or open it's likely that the hinges are broken or damaged and need to be replaced. Many window companies will require you to buy an entirely new window unit in order to resolve this issue, but we are able to replace the hinges in order to save you money.

Window replacement Near me hinges can be damaged by repeated use or weakened over time by corrosion. If you find a broken hinge, it's important to take steps to prevent further damage by being careful not to push the window to close or open.

You can locate the appropriate parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. Consult a professional to avoid purchasing parts that won't fit with your existing hardware. This can result in further damage.

Faulty hinges can be a major issue for your uPVC windows and doors. They can be a significant source of noise, and they can also allow water infiltration that can cause damage to your windows.

Check whether the pin barrels on both hinge halves are aligned. If not, tap the headpin with the hammer to make a slight bend in the hinge barrel. This will help keep the pin in place. Ask a friend to hold the doors while you remove hinge screws and hinges. Replace the hinges and install screws with glue. Finally put the hinges in place using weights or clamps while the glue sets.

After you have fixed your hinges, you can reinstall the door. You can also attach the handle. It is a good idea to replace the screws with the same length of dowels as the original screw, so that they match up with each the other.

Glass that is broken or damaged

While uPVC windows do an excellent job of keeping cold out and heat in, they may become damaged over time. This could include cracked or damaged glass as well as defective locks. If neglected, this could become a very costly issue. This can also detract from your home's aesthetics and lead to a loss in insulation. It is crucial to fix any damage as soon as it occurs.

If your glass is cracked, but not broken it is possible to fix it yourself using the right tools and methods. First, ensure that the area around the glass is clear so that any shards don't injure anyone and aren't an accident-prone area. Then, remove all broken glass pieces and dispose of them in the appropriate manner. Apply masking tape to the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. Pre-fitting the glass pane before gluing it in place is an ideal option when you have windows with two panes. This will ensure that you have enough space to complete your project.

Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame prior to applying the glue. Follow the curing and application directions, which may vary from product-to-product. You may need to clamp the broken glass with lightweight clamps designed to hold delicate materials, based on the angle.

After the adhesive has completely cured, carefully install the glass in the window frame. Make sure that it is aligned with the frame's edge and that there aren't any gaps between the glass sash and frame. Be cautious not to flex the window when it's being reinstalled, as this can weaken the seal and lead to condensation and water infiltration.

Contact a professional glazier such as O'Brien(r) to arrange a replacement if your glass window is completely shattered. It's essential to act swiftly if you have broken glass.