Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. However, if windows with double panes are held in place by internal beading it will be more difficult to remove the panes that are in place and Window repair replace them with new ones. In this situation, you will need to source some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

If you're planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth prior to when you start working on the glass, so that any shards fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window repairs near me. It also acts as an obstruction to prevent intruders from getting into your home. If the gap between the window and the door is significant, you may prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a number of problems, window repair including sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To repair a window repair that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having repositioned your hinges. If you are happy with the fit of the window, tighten the screws to secure them in the right position.

If you can't reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the Window Repair and perform a test fitting. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier if you have someone to help hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, may become displaced, which causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be placed on the windowsill on top. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them rather than repair them. If you encounter any issues with your upvc window you should consult a professional immediately.