double glazing repair Glazing Door Lock Repairs

Are you experiencing issues with your uPVC window or door mechanism not working properly? Perhaps the door or window handles aren't aligned properly or are difficult to use.

It is crucial that the double glazing repair glazed doors work smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can repair your door lock at reasonable costs.

Snapped Key

If a key is snapped off in a lock, it can be extremely difficult. This can also be a security issue because it could leave you vulnerable to an intruder if the door does not lock. Fortunately, there are quick fixes that you can attempt to fix the issue and get your door functioning properly again.

Be calm. If you panic, you could end up pushing the damaged key piece further into the lock.

Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also make use of a screwdriver to break pieces that could be blocking the way. If you have a part of the key that is stuck out then grab it using a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades are also well for this. If you don't have any of these handy, you can make use of needle-nose pliers that bend to create a hook. Finally, you can use a pair of tweezers grab and remove the last bit of the broken keys.

If you are unable to remove the broken key piece, use a lock deicer. This is usually available at all hardware stores, and it works by freezing any moisture or ice that might be in the lock.

If none of these methods are working then it's probably time to call a locksmith. Fitlocks experts can quickly solve problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are easier to use. You can request repairs to your double-glazing online or contact us to discuss your requirements.

Broken Cylinder

A damaged cylinder could pose a serious security risk. A professional locksmith can easily repair the cylinder. A locksmith must tap the cylinder in order to fix it. They can do this with the hammer or any other tool, but the best method is to make use of an extended match or piece of wire. Then, place the end of the match or wire close to the keyway. The locksmith can then strike the lock to crack it. This is more secure than using a hammer that could damage the lock.

Overheating is the most common cause of cylinder heads cracking. This can happen when the block and cylinder head are made from different metals such as cast-iron and aluminium. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand more quickly than the rest.

Corrosion is another possible reason for cylinder fractures. If the head and block of a cylinder are not maintained in a timely manner, they can corrosion or rust and cause them to expand faster than anticipated. This can cause cracks over time.

If your uPVC window or door lock is rigid and requires more pressure to turn it could be due to a variety of causes. This issue could be caused by a faulty locking mechanism, or misalignment and also a worn out handle.

It is a quick and cost-effective fix that a majority of double glazing owners can do. A professional locksmith should be able solve this issue within a matter of hours of arriving at your property. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes, depending on the specific requirements of your home. A professional locksmith will be able to advise you on the most cost-effective solutions for your home. They can also suggest upgrades to high-security 3 Star TS007 euro cylinders that will add an extra layer of protection against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secured.

Broken Handle

It's not surprising that window handle locks can break. They have complex mechanisms that wear out over time. It isn't always easy to pinpoint the reason for the problem and then fix it properly.

Whether the problem is related to the locking mechanism inside or the latch, repairing your broken handle will improve your uPVC double glazing door's security as well as help you stop draughts. When you aren't doing it right, replacing or repairing the handle could be expensive and could cause damage to the door's frame and lock It is therefore worth taking the time to do it right.

Screwdriver Open the window, loosen the screw holding the handle. The screw should be on the inside face of the back plate, normally hidden by a screw cover for aesthetic reasons. You should not lose any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so you can replace them again when needed.

Then, with another screwdriver take the screw off that holds the handle to the spindle on the back. Once the screw is loose, you can take the handle off and remove the broken spindle. Replace it with a brand new one, ensuring it is the same length as the previous one (you can usually find these on the internet or at hardware stores) and screw it securely into the correct position. Do not tighten the screw too much because this could harm the handle as well as the window frame.

Close the handle and try it. The hope is that it will function smoothly and you'll be able to open your window once more.

While you're working on the handle, make sure to check your uPVC windows are closing properly. If they're not, you could experience damp and draughts inside your home, as and also affecting the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges on your window frames to ensure that they close correctly.

Broken Spindle

It is more common for the spindle to break than the handle. This is especially frequent in uPVC tilt and turn windows. These windows require a handle that acts as an electronic locking mechanism within the frame of the window doctor. The handle is connected to a central rod which is then activated by a series of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism fails to open when the handle is turned it is likely that the spindle has broken and this could be a very frustrating issue.

There are solutions to this issue. A reputable locksmith can swiftly and efficiently fix this problem. A good locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel from the area where the spindle is located. This is done without damaging the handle or causing any other damage to the window frame.

Once the wheel is removed, the technician can inspect the spindle to determine what caused it to break. This involves breaking the spindle into its constituent parts and carefully recording their general condition, as well as any specific areas of damage or excessive wear. This process is usually performed by technicians in an environment that is clean.

Then, clean the damaged spindle. This will remove any dirt or debris which could be hindering it from functioning normally. The spindle may be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is comparable in size to the original. The technician will then make holes in the same way into both pieces. This ensures that the new spindle is precisely matched to the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it completely. Home centres sell generic replacements but If the style of your window is unique then you will need to contact a wood worker or cabinet maker who can make the exact part for you. After the spindle is installed, it can be connected to the handle. Line up the screw holes on the handle with the screws that are already in the frame. Once the handle is seated, you can operate your uPVC windows.