Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However If you have Double Glazed window repairs-pane windows that are secured by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC window can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To repair a window repair that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as quickly as you can in order to ensure that your upvc window repairs near me window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the old caulking may require removal before a new layer can be put on. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze it could be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and double Glazed Window repairs close in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window improperly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, which can cause a gap between the frame and sash. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to get them realigned or replaced. Second, the interlock can be unbalanced. It is located on the hinge's side and could require to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than fix them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.