Double Glazing Seal Repairs

When double-glazed window seals fail, it can lead to damp and mould. This could cause damage to the frame and surrounding walls, and it can also impact your health.

Fortunately, the majority of uPVC windows can be repaired by sealing and resealing instead of replacing. A glazier is usually able to clean the window frame and glass, apply a new bead of sealant, then smooth it.

Water Leaks

Window seals are designed for water to stay out of your home. As they wear out, water can be leaking around your windows. Not only is a leaky window unpleasant but it can also cause costly structural damage to your home's structure. It is crucial to spot the issue early and have it repaired by an expert before it gets any worse.

The most common cause of your leaking windows is not the glass but on the frame and sill. This is the most frequent sign of a damaged seal. This can be due to damage to the seal due to weather or age, worn out caulking or even a blocked drain section resulting in an accumulation of ice or water.

Another common sign of a failing Window Doctor seal is the appearance of water between the panes of your double-glazed windows. This is not as dangerous as a water leak, because the water does not travel far enough to get into your home. It does mean, however that the inert gasses that are sandwiched between your windows have escaped out. This can lower the insulation value of your window.

Condensation between the panes of glass is another typical indication of a damaged seal. This could be due to the window seal failing, or it could be due to a damp climate in your home or an issue with the glass. The condensation may not only be a nuisance, but it could also lead to the growth of mould and mildew within your home, which is difficult and expensive to eliminate.

If you are seeing these indicators, it's the time to have an examination of your double-glazed windows. Repairing or replacing your windows will protect your home against water leaks, lower costs for energy, and also reduce draughts. It's a small cost to pay to ensure the safety and comfort of your family. Contact Thompson Creek Window today to discuss your options for window seal repair or replacement. Our experts are always available to assist! We provide assistance to homeowners throughout the Mid-Atlantic region.

Condensation

A damaged seal on the double glazing can allow water into the gap that is used to insulate. This can lead to condensation in the window panes and may cause fogging or misting.

If you see condensation in your home It's time to call a double glazing repair service. Condensation is a sign that the vacuum seal fabricated at the factory has been damaged and moisture is getting into the gap between the insulated and non-insulated.

Condensation can be caused by a variety of reasons, but it is typically the result of gaskets that are not properly fitted and sealants, as well as insulation within the uPVC frame of the windows. Therefore there are different double glazing seal repair options, but it is crucial that the seal you choose to replace is properly designed to ensure a perfect fit and a water-tight seal.

Typically, the gaskets that are used to seal the gaps between double-glazed units are made of a material such as polyurethane foam. They are designed to last a long time, however they may become damaged over time as a result of natural wear and wear or exposure to fluctuating temperatures and weather conditions.

As time passes the foam can shrink or crack. This could lead to cracks in your seal and allow moisture to enter the double-glazed window. This causes condensation, but can cause a loss of energy efficiency, which means that you're losing heat from your home to outside air.

Re-sealing the windows is one way to fix this problem. This is not a sure solution as it will remove the existing condensation, and not address the underlying problems that are causing the double-glazed window to leak or develop condensate.

A professional who is able to provide an insurance-backed guarantee must replace your windows in full. If the company fails, you're still protected by insurance. It is important to note that the warranty for your replacement windows must be a minimum of 10 years.

Misting

Check that your double-glazing seals are in good condition as the fall season approaches. Window seals that are damaged or worn out do don't just affect the insulation properties of your windows, but can also cause damp, mold and condensation. To prevent further damage to your double-glazed windows and save money on energy bills it is essential to fix any issues as soon as you can.

Double-glazed windows are constructed of two glass panes which are joined by a gas-filled inner space. A sealant layer on the outside fills the gap between the uPVC frame and the glass. This is crucial to maintaining the air-tight seal which keeps warm and cold air from your home, saving you money on your heating bills. Unfortunately, over time, these seals will fail due to age and weather conditions, or poor installation. The magic insulation formula which makes double glazed windows so effective can begin to lose its effectiveness when this happens.

If not checked leaks, damaged seals, or other issues could lead to condensation and damp that can not only affect the appearance of your windows but can also affect your health. Moisture and dampness can cause damage to walls, ceilings flooring, floors and other surfaces in your home. They also create allergens and irritants that are harmful to your health as well as the health of your family.

One of the most frequent problems that can happen to your double glazing is misting between the panes. This happens when moisture gets inside the insulated section of your windows. It can be difficult to fix without professional double glazing repair.

DIY solutions to this problem are available, but we advise against them as they could be messy and Window Doctor damage your windows. These methods involve drilling holes into your glazed units and using chemicals to eliminate the fog and condensation. This can cause a number complications, including exposing your windows and units to water damage.

Professional glaziers possess the tools, skills and experience necessary to safely seal uPVC frames. They can also provide you with lasting results. They can also offer tips on how to maintain your uPVC window to avoid future problems.

Draughts

A draft that is coming from your window is a sign that the sealant could have been damaged. It is recommended to repair it or replaced. This will stop cold air from getting into your home. It will also improve efficiency in energy use, decrease heating costs, and improve the comfort.

It is also important to remember that not all draughts come from the window seals but rather from the gap between the frame and the bricks. In certain cases, it could be possible to repair this by simply caulking the gap. If this does not work, you will require having the seal professionally repaired.

When the sealant on double-glazed windows starts to breakdown, it allows water ingress. This can cause damp or even mold. This could affect health and cause damage to the property. It is crucial to take care of any water ingress problems as soon as you spot them. And if your windows are still under guarantee it is worth checking with the company that you purchased windows from, as they may pay for the repairs.

It is worth checking if the windows are covered under warranties. Certain companies provide lifetime guarantees, while others only cover 10 years. If your double glazing is under warranty, it's worth calling the company you bought the windows from as soon as you can and providing them with details of any issues you are experiencing. It is recommended to make this contact in person or by letters and emails, to ensure everything is documented and clear.

Also, it is important to note that draughts are typically caused by defective hinges, and not due to the lack of seals that are effective. The hinges cover the window sash which is the one that you open. If they are not regularly oiling them they could become stiff. This can leave gaps between the frame and the sash, which can allow cold air in. Replacing these hinges will solve this problem without affecting the window seals.