Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. However when you have double pane windows that are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you may want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can get at the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most often, upvc repairs near me window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you should avoid 'over-caulking'. This can make your window doctor harder to clean and decrease its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze It could be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change a window hinge but it's much easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a certain way or due to improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to offer assistance.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. If they're beyond repair, it may be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge's side, and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next common reason for draughts is window seals, these can become worn down or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as you can.