Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. If you have double glazing repairs near me-paned windows that are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap between the window and the door is substantial, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

uPVC is a durable, Window repairs energy-efficient and affordable alternative to timber sash window. Over time, they can develop a number of problems, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window to get to the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles may also loosen. This is often caused by screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close the window and do an experiment fitting. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes have no debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazing repairs-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. It's easy to change a window hinge, but it's simpler if you have someone to help hold the frame.

Check that the uPVC hinges open and close in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us photos through our website can often solve the issue. We are always happy to give suggestions.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, can become misaligned, this can cause an opening to appear where the sash joins the frame. They can be repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it is possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and eventually, they will reach the point when it's more efficient to replace them than repair them. If you are experiencing issues with your Upvc window you should consult a professional immediately.