Repairs to upvc repair Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need close the window and perform a test fit. The corner joints of the sash need to align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal than the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze, it may be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and can be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler with someone else to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should open.

The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to provide assistance.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your upvc repairs windows.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, may become displaced, which causes an opening to appear between the sash and the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair, Upvc Window Repairs it might be necessary to get them re-aligned or replaced. The interlock, which is on the hinge side of the window, may also be misaligned, and UPVC Window Repairs again it may be feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to replace them than to repair them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.