Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double glazing-paned windows that are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric, not onto the floor uPVC window repairs and could be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues like sliding. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll need to open the window to access the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for fitting. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is easier to do with someone else to help hold the frame up.

It is also worth checking that the upvc repair hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also become misaligned due to wear, causing a gap where the sash meets frame. They can be repaired by giving them a good clean, but if they are beyond repair it could be necessary to get them re-aligned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge's side, and might require to be cleaned. In some instances it is possible to replace the hinges.

The next most common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They can help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair windows made of upvc will continue to provide excellent security and insulation for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as you can.