Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case you'll need to locate some plastic spacers that will assist the new pane to fit properly into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from entering your property until a professional is able to fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the window and the door is significant, you may want to use security screens that has an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, Window Repairs and even security. It's crucial to act when you discover that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and window repairs safe from drafts.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. The first step is to close the window and perform an initial test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it opens in an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window repairs a certain way or due to improper installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to give suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. First, the hinges due to wear and tear can become misaligned, this can cause a gap to form between the sash and the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it is possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the risk of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as possible.