Window Repairs

Window repairs can save homeowners money and make their homes warm. In the event of severe damages such as broken glass or a shattered frame, a replacement window may be required.

But many other issues can be repaired to extend the life of your windows. Common issues include:

Cracked or Broken Panes

Cracked window glass could be caused by a lawnmower that throws rocks at the wrong time or a tree branch being blown by strong winds. This not only looks terrible, but it could cause more energy costs because the broken pieces let cold air in to your home. Luckily, it's usually relatively easy to repair windows that have cracked panes.

Begin by carefully removing glass with gloves and safety glasses. You may need to use a utility knife to loosen any remaining putty or glazing compound that has accumulated around the edges of the frame. Then, clean the glass's surface and the wood of the frame using a soft cloth or paper towel.

Once the area is clean and dry, apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from getting into the frame through the crack and result in further damage.

A crack that is severe in double-paned glass can cause gas to leak between the panes, which can make your windows less insulative. If the crack is significant enough to cause damage to the integrity of the glass or if you have an inner pane that's totally missing, it's time to call in an expert.

Cracks caused by thermal stress can occur when there is an extreme temperature difference inside and outside your home. This causes the glass to expand and shrink. If the cracks are on two sides of a window it is recommended to replace it instead of attempt to repair it.

Clear tape can be used to close cracks in windows that aren't yet ready to be replaced. It will also keep out cold and bugs. You can cut an area of nylon stocking or tarp that's sufficient to cover the crack, and stick it to the wall using duct tape. This isn't an indefinite solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks appearing on the windows of your old ones it is recommended to contact your local business to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is among the most common problems with windows. It can degrade a house's appearance and create a security hazard. It is possible to repair the wood that has rotted. First, you must identify the cause of the wood decay. Look for leaks on the roof and other areas where water can enter the wood.

Next, you will need to get rid of any rotten areas of the window frame. This can be accomplished with the claw hammer, chisel, or rasp. After you have removed the decayed wood, you'll have to replace it with fresh wood. It is recommended that you choose treated wood for this project as it will be resistant to decay. If you are unable replace the wood damaged by rot You can try using filler or wood hardener to strengthen the damaged area. This kind of product will be available at a majority of hardware stores. To get the best results, make sure you follow the instructions on the label.

After you have replaced the decayed areas of the windowsill, it is crucial to safeguard the newly repaired area. You can do this by applying a water-resistant wood sealant. A product such as Sikkens is an excellent option for this job.

It is also possible to use a two-part epoxy filler to shield the wood from further damage. This product is easy to apply and gives a good finish. It is essential to follow the instructions on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. Start with a rough sandpaper, then move on to a smoother grade.

You do not want to expose the rotted part to more moisture. It is a good idea therefore, to protect the surface you have repaired with an oil-based prime which will shield it from moisture. Then, you can reapply waterproof wood sealant.

The W won't open

There are many reasons windows won't open. The house could have settled, or the wood frames might have warped due to rainy weather. There is also the possibility that someone secured them with a nail for security. With a little patience and the right tools you can unlock most stuck windows.

The accumulation of gunk or debris can be a major reason of the window not opening. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges and locks. In addition, metal hardware may get rusty when in contact with humidity or direct sunlight. Spraying grease on these areas to aid in preventing oxidation and help keep your windows operating properly.

Stuck windows can be caused by the breaking or loosening of the pulleys used to lift and lower the window. These components may lose tension and get blocked especially when the window is two or more stories above the ground.

If you are having difficulty opening a door repair, use a pry-bar to gently push the window open. Place a wood block on the frame to give the pry bar more leverage. Also, be careful not to scratch the window or the wood. Try applying a hairdryer along the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A broken spring could be the cause of windows that don't raise or lower. You will need to consult the owner's manual for more details based on the manufacturer of your windows.

If you have tried cleaning the moving parts of your windows and kmgosi.co.kr then lubricating them but they're still unable to open, it might be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let windows in your home become functional to inoperable. If a window isn't properly shut could make your home vulnerable to burglary and water damages. Contact us today for more information on our replacement windows and services!