Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will generally fit within the frame that was previously installed easily. However If you have double-pane windows that are held in place by internal beading it will be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your property until a professional comes out to repair the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is large, you might think about the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action immediately if you realize that your upvc window repair windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, Upvc window repairs shut your window and check for an appropriate fit. If you are happy with the size of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it can be due to the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze it could be hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change the hinges on a window, but it's easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window repair hinges could be caused by improperly opening the window in a particular way or by improper installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. The hinges, also due to wear and tear could become misaligned. This can cause gaps to develop between the sash and the frame. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock may also become unbalanced. It is located on the hinge side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as possible.