Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the home until a professional is able to come out and repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window doctor near me as it offers the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and UPVC window repairs secure from draughts.

uPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need close the window and perform an experiment to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle, UPVC window repairs and then turn the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to note that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze it could be hinges at fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is essentially a very simple procedure, but it is easier with someone else to assist in holding the frame in place.

Check that the uPVC hinges are open and closed in the proper direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges, also because of wear and tear, may become displaced, which can cause gaps to develop where the sash meets the frame. They can be repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be possible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be put on the top of your windowsill. They can keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult a professional immediately.