Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However, if you have double pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance you'll need locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the home until a professional can come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is large, you might want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and upvc window repairs long-lasting alternative to timber windows made of sash. As time passes, they may be affected by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a sagging window replacement you can try repositioning the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit of the window, tighten the screws to hold them in the right position.

If you aren't able to move the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and wet floors. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze It could be hinges at fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges will wear out over time. Changing a window hinge is essentially a simple process, but it's simpler with someone else to assist in holding the frame up.

Check that the uPVC hinges open and close in the correct direction. You can check this by looking for the arrow on each hinge, this shows which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or by improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you advice.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also become unbalanced due to wear, causing a gap where the sash and frame meet. This can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it's feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals. These are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be positioned on the top of your windowsill. They can keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide excellent insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it is cheaper to replace them than to repair them. So, if you're having issues with your upvc windows, it is always recommended to seek help from a professional immediately.