Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that will aid the new pane in being able to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window replacement, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they may be afflicted by a variety of problems including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can get to the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, window Doctor close your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and window doctor the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler when you have a person to help hold the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

Faulty window hinges could be caused by improperly opening the window in a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be happy to give you advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges may also become misaligned due to wear, creating gaps between the frame and sash. If they're beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it may be possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and again will lessen draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window doctor sill. These will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it is more cost-effective to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult a professional as soon as you can.