Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation you'll need to find some plastic spacers that will help the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards fall onto the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional is able to fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap between the window and the door is significant, you may need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues, upvc window repairs including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fit. The joints at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows repair that are hinged and, like all mechanical parts, they can wear down over time. It is very easy to change the hinges on a window however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation in the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you advice.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges can also become disaligned as a result of wear, causing a gap where the sash and frame meet. They can be fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to give them a clean but in some instances it could be necessary to have them replaced.

The next common reason for draughts are the window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.