Repairs to uPVC Windows

upvc repairs windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your home until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. As time passes, they may develop a variety of issues, including sagging. A window that is sagging can cause problems with light, Upvc Repair draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it can also be due to the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, old caulking may have to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and uPVC repair the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to change a window hinge, but it's easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the correct direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to provide assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also lower the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges can also be unbalanced due to wear, causing an opening where the sash meets frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them aligned or replaced. The interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and they may reach the point when it's more economical to replace them than repair them. If you have any problems with your Upvc window you should consult an expert as soon as you can.