Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and window repair they generally fit into frames that were previously in use very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this case you'll need source some plastic spacers to help the new pane to fit correctly into the frame of the window.

If you plan attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from getting into your home until a professional arrives to repair the window repair. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time, they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver, Window repair and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the fit of the window repair, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if get up each morning to find mouldy walls and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. It is important to keep in mind that when it comes to upvc window repair window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with ease, it may be hinges at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will be damaged over time. It's very simple to change a window hinge but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, causing an opening between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock may also become misaligned. This happens on the hinge's side, and could require to be cleaned. In some instances it is possible to replace these.

The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc you should consult an expert as soon as possible.