Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, window repair where they could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can develop a variety of issues that include sliding. A window that is sagging can cause problems with light, draughts or even security. It's important to take action when you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you can't reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most often, uPVC window repairs near me leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will only make your window repair harder to clean and reduce its energy efficiency.

Verify that the drainage holes do not have debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens in a breeze. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. Changing a window hinge is an easy process but it can be easier when you have a person to help you hold the frame in place.

Verify that the uPVC hinges are closed and open in the proper direction. You can do this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more smoothly. It can also lower the possibility of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also due to wear and tear may become displaced, which can cause gaps to develop where the sash meets the frame. This can be easily fixed by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. In addition, the interlock could also become misaligned. This happens on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your window made of upvc you should consult an expert as soon as possible.